Diabox failures

@Ruthbia said:

Meginersaid:
@meginer said:

Ruthbiasaid:
@Ruthbia said:

@Anaisabel did not restart me, wait a few minutes and reached alone.Of course with June 2023.

Diaboxkotlin is apparently the same as Diabox but it didn't work for me.If it allows to calibrate but fails.

@Meginer measures me continuously with the plus, I have no problems, but I do not use LibreLink and I have no interference.For me that they have only extended 24h the duration, the rest is all the same.

@Set in Madrid gave me the first 6 plus in January, I had 4 normal and that's why I released it in March.They come from the FJD.

But you have the free 2 continuous? I mean that if you downloaded the version of the Free continuous.I have the old one, scan with my mobile and I have diabox for everything else, I have the permits removed to the free.But my question is that with the plus you can continue like this or you have to have the continuous version of the free and if it does not.Pq if you are going to give problems, Quito Diabox ta Q The interesting thing is that it can calibrate, and if you can't, it is not worth it.

I still activate with the modified free 1 glucometer that does not measure continuously, the freeLink app is the last in force, but scan by NFC so that there is data for the endocrine, does not measure continuously for having activated with glucometer, and I have a Diabox in continuous.

The same as with free 2 when I was not plus.In a clock with G-Watch and without problems taking Diabox data.

I have this version of LibreLink

It is that it is not clear to me.

Diaboxkotlin ..

A few weeks later, until I have only 2 sensors I can not make an appointment with the nurse of the Health Center to request a new sensor remittance.Therefore, I continue with those who gave me the last time, the free 2. For what you say, I think the next ones will be the plus, but we will see.

On the other hand, I have returned to give several opportunities to the latest version of Diaboxkotlin.A disaster: continuous disconnections, every time a sensor change an absolute chaos with deletion of apps, new discharges and facilities .... come on that I have fed up for the umpteenth occasion and uninstalled it.In my case, I only want it for that of calibration, but the problems it gives me are not worth it.Apparently, they are about to get a new version shortly, but we go that I think I will not continue with the headaches.

I as a clock use Garmin, since they are the ones I use for the sport.When Diabox works, it is perfect, but I can't make more than 8 hours without failures and Bluethouse disconnections.In short, I lose the advantages of calibration and, knowing the differences in the free data with the glucometer, because I have returned to freelink up, being a follower of myself, and at least I avoid the headache.

On the other hand, Diabox connects with Garmin by Bluethood, so you usually have a connection between them.However, LibreLink Up does it if there is internet data connection, so in mountain areas with difficult coverage because you run out of the clock, although they continue operational in the Smartphone app.That is, you have to get the phone to enter the free app and see the glucose, but you lose it in the Garmin and it is still a fattening.

@

Diaboxkotlin ..

A few weeks later, until I have only 2 sensors I can not make an appointment with the nurse of the Health Center to request a new sensor remittance.Therefore, I continue with those who gave me the last time, the free 2. For what you say, I think the next ones will be the plus, but we will see.

On the other hand, I have returned to give several opportunities to the latest version of Diaboxkotlin.A disaster: continuous disconnections, every time a sensor change an absolute chaos with deletion of apps, new discharges and facilities .... come on that I have fed up for the umpteenth occasion and uninstalled it.In my case, I only want it for that of calibration, but the problems it gives me are not worth it.Apparently, they are about to get a new version shortly, but we go that I think I will not continue with the headaches.

I as a clock use Garmin, since they are the ones I use for the sport.When Diabox works, it is perfect, but I can't make more than 8 hours without failures and Bluethouse disconnections.In short, I lose the advantages of calibration and, knowing the differences in the free data with the glucometer, because I have returned to freelink up, being a follower of myself, and at least I avoid the headache.

On the other hand, Diabox connects with Garmin by Bluethood, so you usually have a connection between them.However, LibreLink Up does it if there is internet data connection, so in mountain areas with difficult coverage because you run out of the clock, although they continue operational in the Smartphone app.That is, you have to get the phone to enter the free app and see the glucose, but you lose it in the Garmin and it is still a fattening.

If I have to go to the continuous format, could glycemia see somehow in a Amazfit 2 GTS mini?

15 days nothing.He has just died as of day 13.

Fails the same as free 2

Ruthbia said:
@Ruthbia said:

15 days nothing.He has just died as of day 13.

Fails the same as free 2

@meginer that yes, that I use Diabox and measures me continuously, also calibrate with the plus and I have the clock.

Look, the line continues is when it gives Low and then dies.In Diabox it was 76mg/dl and in free low directly and LibreLink gave 53.

On the clock it gives me more because I have taken the photos a few minutes later and when I wake up, up the glucose, then go down.

@Ruthbia How have you done to work ???The free 2+, I have the see.2023 06 15.And scan the sensor makes me wait 60 minutes of initialization, when the sensor is already working in the freeLink app and when it reaches 0, it does not give values, I have put it again new sensor and does the same 60 min and nothing

Anaisabel said:
@Anaisabel said:

[[ERROR-TRANS]]@Ruthbia , con el Plus, está última vez, en diabox tuve que esperar 60 minutos, hizo la cuenta atrás, te ha pasado a ti?.

@Ruthbia said:

@meginer that yes, that I use Diabox and measures me continuously, also calibrate with the plus and I have the clock.

Look, the line continues is when it gives Low and then dies.In Diabox it was 76mg/dl and in free low directly and LibreLink gave 53.

On the clock it gives me more because I have taken the photos a few minutes later and when I wake up, up the glucose, then go down.

I have a Amazfit GTS 2 mini watch, will it go well with these changes?, Keeping all the paraphernalia that I have, of course.

Dragmire said:
@Dragmire said:

Anaisabel said:
Anaisabelsaid:
@Anaisabel said:

@Ruthbia, with the plus, this last time, in Diabox I had to wait 60 minutes, he made the countdown, has it happened to you?.

In the end it worked for you?

On Saturday I changed the sensor and the same thing happened to me, I was initializing 60 and I said then !!, but after two minutes he stopped the countdown and worked.

Apart from what has been said before, the first Plus sensor lasted for 15 days both Diabox and LibreLink, but with the second sensor I was exhausted at 14 days and as before it gave me 11 extras.When I spent this time exhausted or expired I don't remember well, but it kept working (I mediated, but it didn't graph) until it reached 15 days.

@meginer I do not use it more than with NFC, I don't have it continuously.The sensor with the reader active, as formerly.

I have in continuous diabox only.

@Dragmire I did nothing.I scanned it with the NFC so that Diabox recognized it and did not.I left it and it only connected.

@Ruthbia said:

@meginer I do not use it more than with NFC, I don't have it continuously.The sensor with the reader active, as formerly.

I have in continuous diabox only.

@Dragmire I did nothing.I scanned it with the NFC so that Diabox recognized it and did not.I left it and it only connected.

So far when changing sensor, start with free, I wait for 60 min and then scan with free and diabox and usually connect me in minutes.

With this version can I do exactly the same?

@meginer, I have version 2 12 and I do it as you.As this version T will measure continuously you have to see if T is going well, I lost the signal a lot and I do not see practical to open the application every time you want to see blood glucose so I remove all permits, you once scan and I use Diabox.

What I don't know what Diabox version you have to have June 23, and at the moment it works for me.

On Telegram, he put that see.Diabox had no compatibility with 2+, because he did not have the developer with whom to try, maybe that's why he goes that evil.

But still it works, I think it can be for how you activate the sensor, I do it from the mobile with the latest version of LibreLink.And I have reinstalled the diabox but nothing

Anaisabel said:
@Anaisabel said:

@meginer, I have version 2 12 and I do it as you.As this version T will measure continuously you have to see if T is going well, I lost the signal a lot and I do not see practical to open the application every time you want to see blood glucose so I remove all permits, you once scan and I use Diabox.

What I don't know what Diabox version you have to have June 23, and at the moment it works for me.

Dragmire said:
@Dragmire said:

On Telegram, he put that see.Diabox had no compatibility with 2+, because he did not have the developer with whom to try, maybe that's why he goes that evil.

But still it works, I think it can be for how you activate the sensor, I do it from the mobile with the latest version of LibreLink.And I have reinstalled the diabox but nothing

[[ERROR-TRANS]]@Dragmire , en diabox donde te pone NFC MODE tiene que poner NFC SCAN. Lo que no se como se cambia.

Anaisabel said:
@Anaisabel said:

@Dragmire, in Diabox where NFC Mode makes you have to put NFC scan.What I don't know how to change.

@Dragmire said:

Anaisabelsaid:
[[ERROR-TRANS]]@Anaisabel dijo:

@Dragmire, in Diabox where NFC Mode makes you have to put NFC scan.What I don't know how to change.

[[ERROR-TRANS]]Pienso que puede ser porque como tu ya lo tienes vinculado, te sale eso. Lo iniciaste el sensor 1° con la app de librelink? Última version?Y luego ya el diabox .

NFC Scam always puts it even when the sensor is exhausted.

Have you looked if you have NFC activated?

I send a photo of how always comes out