Free Freestyle 2 and new mobile

Let's see if this poster is normal or not

It is rare that you get out if you have given you all the permits.Let's see if they work later.

Another question: in registration book when do the measures come out?
I already measures and I lacked a permission 😊 @sherpa41 thanks
And another if he measures and apart from not registering the measures now should be alarm and does not.

It has been measuring for a while and only this comes out and it doesn't put the time either

anaisabel said:
Another question: in registration book when do the measures come out?
I already measures and I lacked a permission 😊 @sherpa41 thanks
And another if he measures and apart from not registering the measures now should be alarm and does not.

In the registration book only measures appear when you escape.

And when is it measuring it does not put the time ???

@isabelBota, I have already installed Diabox, I think that the latest version, and m g often at the same minutes of scanning for the first time.
But, there is always a but I get a tab of tips that says that an application connected to the sensor forces the detent or something, this in English.
And the alarms of freeLKNK do not suck, should they go even if I use Diabox, can they have themselves on both places?

M this comes out

Above the advice has a little sound 🤦

anaisabel said:
and when is it measuring it does not put the time ???

He puts it up to the left ... (In your print it's 21:29)

anaisabel said:
@Isabelbota, I have already installed Diabox, I think that the latest version, and most often at minutes of scanning for the first time.
But, there is always a but I get a tab of tips that says that an application connected to the sensor forces the detent or something, this in English.
And the alarms of freeLKNK do not suck, they should go even if I use Diabox, they can be had on both places?

Well, I have read that some have happened to some, but I don't know how to solve it, I'm sorry. I don't have Samsung, I don't know if it will have to do.Surely someone can tell you how to fix it.

Let's see if someone can tell me how to remove that advice.
With the other mobile, sometimes I was closing application or stopping, it was annoying, but it was not constantly like now.
And the LibreLink loses signal at all times, an application eme.

@Anaisabel I also have the advice, but I ignore.
It does not whistle because I have mute system notifications.
Of course, I active with reader, I don't have freeLink in continuous measurement

@Ruthbia, I have annulled system system and sound vibration, but still more vibes.AND
I have an active notification vibration, if I remove it, the advice does not vibrate, but of course then it does not make another application that I want to do it.
And you can't do anything so that it doesn't come out?

Hello
More or less is all fixed, except the sign that silence sleeping and ready.
FreeLink alarms sometimes jump very rarely and don't sound.And when scanning does not might what I have put.Lose very often signal.So m serves little or nothing.
What is connected to nearby devices in LibreLink and Diabox, is it so or do I have to remove it in any application?

You have to give permission only to one.That is why the signal continuously will.

Ok, I'm going to remove it.
Thank you.

Hello everyone
I read all your comments and I have followed all the indications, the vast majority of all of you are true teachers of LibreLink and Diabox, but I am a Negao for those matters.
I explain, I have been using the sensor a long time ago, and reading I decided to buy a new mobile since the old man had no NFC, I decided on the Xiaomi 13t Pro with a capacity terabits.
I have downloaded the two programs mentioned above but I repeat I am very clumsy for computer science and once the applications are installed I no longer know where to continue.
In LibreLink stays on a screen where he tells me how I have to put on the sensor, and from there I do not leave.
In Diabox he stays on the first screen when he opened the application and I don't know how to follow (not send me s diabox for clumsy)
Since I admire your suggestions, I hope you can help me.
Thanks in advance

wjjpn said:
hello everyone
I read all your comments and I have followed all the indications, the vast majority of all of you are true teachers of LibreLink and Diabox, but I am a Negao for those matters.
I explain, I have been using the sensor a long time ago, and reading I decided to buy a new mobile since the old man had no NFC, I decided on the Xiaomi 13t Pro with a capacity terabits.
I have downloaded the two programs mentioned above but I repeat I am very clumsy for computer science and once the applications are installed I no longer know where to continue.
In LibreLink stays on a screen where he tells me how I have to put on the sensor, and from there I do not leave.
In Diabox he stays on the first screen when he opened the application and I don't know how to follow (not send me s diabox for clumsy)
Since I admire your suggestions, I hope you can help me.
Thanks in advance

@Jmjpn
FreeLink is true that that screen comes out, but you get to scan sensor (it is that I do not know exactly but you must arrive).You escape and the countdown begins.
In Diabox I don't know which screen you stay, if you can put a print ...
But Diabox does not start it until you work with LibreLink, if not, it does not let you start freeLink (always free).