Handle a little hand

@Cacharro is not so complicated.

If I started with LibreLink, you should have the measurements continuous and not have to use the NFC (put the mobile on the sensor).

You will have to go to the application configuration and give all the permits, you must have the Bluetooth option disabled.

@Sherpa41 to me an application that cannot be calibrate, it is not worth it.I just released my first free 2 plus and goes as bad as the free 2. In 2 days it deviates 20 below and 30 above, randomly.I don't see differences.

The free freestyle reader continues to give better approach to the capillary than LibreLink.

I still start with the reader and monitoring with Diabox.FreeLink for me is residual.

I have to say that LibreLink started using free 1, in 2017, when in Spain there was no option.I lowered it from a Belgian server and was great with 1. Calibrated it with Glimp.

I do not understand why they do not improve the algorithm and equate it to that of the reader that is much better.

Since 2016 that I use sensors, my glycosilada has not risen from 6. But because caliber, FreeLink always gives superior values ​​to my glycemic reality, the PGS indicator of Diabox nails it.

Ruthbia said:
@Ruthbia said:

@Cacharro is not so complicated.

If I started with LibreLink, you should have the measurements continuous and not have to use the NFC (put the mobile on the sensor).Yes that's how it is.

You will have to go to the application configuration and give all the permits, you must have the Bluetooth option disabled.Correct no problem.

Ruthbia said:

I will wait to change the sensor, activate with the mobile and I already tell you.

Greetings.

@Ruthbia we have discussed it several times and if some seem to you better.I miss me, because the only sensor that was not adjusted (30 that I have used) was the one that I always use with Diabox.Also in all the sensors that I used it, I never managed to let me know of a hiccup, instead freeLink from 24h it is perfect, always, nailed with my gluconteros.

In fact, today when I see a deviation, I take another glucometer and the one that was right was free not the glucometer.

I alreadyho much more freely than of the glucometer.With which to calibrate it seems to me nonsense.And more with the terribly bad and complicated system of Diabox.

@Sherpa41 said:

@Ruthbia we have discussed it several times and if some seem to you better.I miss me, because the only sensor that was not adjusted (30 that I have used) was the one that I always use with Diabox.Also in all the sensors that I used it, I never managed to let me know of a hiccup, instead freeLink from 24h it is perfect, always, nailed with my gluconteros.

In fact, today when I see a deviation, I take another glucometer and the one that was right was free not the glucometer.

I alreadyho much more freely than of the glucometer.With which to calibrate it seems to me nonsense.And more with the terribly bad and complicated system of Diabox.

@Ruthbia said:

@Sherpa41 said:

@Ruthbia we have discussed it several times and if some seem to you better.I miss me, because the only sensor that was not adjusted (30 that I have used) was the one that I always use with Diabox.Also in all the sensors that I used it, I never managed to let me know of a hiccup, instead freeLink from 24h it is perfect, always, nailed with my gluconteros.

In fact, today when I see a deviation, I take another glucometer and the one that was right was free not the glucometer.

I alreadyho much more freely than of the glucometer.With which to calibrate it seems to me nonsense.And more with the terribly bad and complicated system of Diabox.

Look what the plus does, and you'll see that it is little precise.If you do not calibrate, do not approximate the glycemic reality.

In Diabox, calibrated, for Bluetooth I was 203.

That you compare it with just a glucometer has no value.As I tell you, lately and especially the freestyle glucometer fail.I always have 3 glucometers of several brands, prepared for when one of them deviates a lot from the sensor, so I take another glucometer, put the blood and usually get closer to the value of the sensor, than to the other glucometer.

One of the ones I have to compare is the freestyle glucometer, but lately it does not seem reliable, I have ever seen variations of up to almost 100 points with the other two glucometers (and with the sensor), so when the strips are over, I will discard it forever, in favor of the contour Next.They said here that it was more precise.Let's see how ...

Good morning everyone

It promised to be a free class of technology for a diabetic, also retired and quite denied for these issues.It started very clear, with the NFC and the Bluethoth, but the more comments I have read, the more it has been complicated everything.That if reading continues, that if alarm, that if it acts with the reader, with the mobile.In the end, I think, that I have quite complicated my days with the doses, sites, rations and others to get angry with all this.

I always start the sensor, with the meter, and then if I want to read with the mobile approximate and point.But the first, the meter, for being more manageable and reliable, apart from that it carries its glucometer, to contrast.

I do not know that Diabox.I called Abbott to ask them and they came to say that it was something alien to the system, like I forgot about that story.And I do that.So I don't want problems, I don't want Diabox.

I think, if I remember correctly, that @ruthbia does something similar.If not, to correct me.

Greetings and happy Sunday to everyone

Ja ha ja ja.tranquility. Then each one has to learn and put into practice what best understands and domine.oyer changes the sensor but start again with the meter (until the analysis does the day 20). After starting with the meter, the Mòvil Acerquè the Mòvil to see what I told me ... and said this: "The sensor is already initiated to confirm" ... more or less.Mobile application when it is already left over it as long as they work well (and if so .... do not meneallo). By the same way respecting and learning from other foreros that have a "opinion and proceeding different." Safe.

The truth is that recommending Diabox (a quite complicated app) to someone who already has a hard time using LibreLink, does not seem the best option.

And that of telling you to Abbot ... XD is a fairly illegal application and very persecuted by them.Sometimes they have threatened this forum for talking about him.

If the reader is doing well, then.I see the only thing that I see him, is that as you have to scan you do not obsess so much to look at glucose.But in the long run everyone goes to the mobile.

The reader is more comfortable than the mobile to read, it is faster, the mobile faces.

For years it could not be measured continuously, neither with a reader nor with mobile and nothing happened, you do not obsess.Cogs routines.

Each one must use whatever do well and consider that it has good control.

Hi, here I am again.

As I said more behind, I already have the mòvil configured to scan the sensor but then I do not initiate a sensor with the glucose etc., but when I am not started it does not give alarms etc, this is done by the reader "Freestyle free2" which is with which the sensor started.A "LibreView.com" .Connect the reader to the computer with the yellow and USB cable and I download the data in PDF that I keep them there.

In the option of options that I attach I do not see the option of passing the data to the computer, not to be in the "Connected Applications" tab and once there download the "Free Link Up" and put a Mia mail address and share the data to download to the computer No Sè .... Maybe I am lying ... what the experts tell me? Thank you.

I have another question but I will do it apart so as not to overwhelm a lot hahaha..thanks.

Greetings.

Well, I am clueless.

To connect the mobile to the computer (which I ever did it with that of my wife) can be done with a direct cable (Mobile-Useb computer), which is not if you are worth loading the battery without the power plug.Thank you.

cacharro said:
@Cacharo said:

Well, I am clueless.

To connect the mobile to the computer (which I ever did it with that of my wife) can be done with a direct cable (Mobile-Useb computer), which is not if you are worth loading the battery without the power plug.Thank you.

cacharro said:
@Cacharo said:

Hi, here I am again.

As I said more behind, I already have the mòvil configured to scan the sensor but then I do not initiate a sensor with the glucose etc., but when I am not started it does not give alarms etc, this is done by the reader "Freestyle free2" which is with which the sensor started.A "LibreView.com" .Connect the reader to the computer with the yellow and USB cable and I download the data in PDF that I keep them there.

In the option of options that I attach I do not see the option of passing the data to the computer, not to be in the "Connected Applications" tab and once there download the "Free Link Up" and put a Mia mail address and share the data to download to the computer No Sè .... Maybe I am lying ... what the experts tell me? Thank you.

I have another question but I will do it apart so as not to overwhelm a lot hahaha..thanks.

Greetings.

Hello.Well yes, I just checked it.And I say, whenever I have an Internet connection and a router or have data on the mobile?Thank you so much.

@Cacharro When you measure with the mobile approaching the mobile to the sensor, the last 8 hours of turning on the mobile and in the Abbott of Abbott of Libreview.So your doctor can see it.You don't have to do anything else.

If you only use the reader, then yes, it is when you must put the reader to the computer and download data through the Web Libreview.The reader does not share data with Abbott's clouds.

Ruthbia said:
@Ruthbia said:

@Cacharro When you measure with the mobile approaching the mobile to the sensor, the last 8 hours of turning on the mobile and in the Abbott of Abbott of Libreview.So your doctor can see it.You don't have to do anything else.

If you only use the reader, then yes, it is when you must put the reader to the computer and download data through the Web Libreview.The reader does not share data with Abbott's clouds.

Allow me another question. Cambiè the sensor and initiate it even with the Freestylelibre2 Lector.Say: the mobile can be off without eight hours and then when scanning the sensor links the graph with the previous readings? I do not know if I explain me. Thank you.

cacharro said:
@Cacharo said:

Allow me another question. Cambiè the sensor and initiate it even with the Freestylelibre2 Lector.Say: the mobile can be off without eight hours and then when scanning the sensor links the graph with the previous readings? I do not know if I explain me. Thank you.